ID 527530

Archived

Asphalt Concrete Milling And Resurfacing Project, Albany NY

Albany County

Owner Reference: D264218

Bid Date: 03/05/2020 at 10:30AM

This work shall consist of furnishing, placing, grading, compacting, and trimming shoulder backup material of the type indicated adjacent to shoulders to the lines, grades, and locations indicated in the contract documents or to the lines, grades, and locations directed by the Engineer, in accordance with these specifications and details shown in the plans.The material shall be placed on the grade in a manner to minimize segregation using equipment and procedures approved by the Engineer. Uncontrolled spreading from piles dumped on the grade resulting in segregation will not be permitted. Maximum loose lift thickness prior to compaction shall be 6 inches. The contractor's compaction methods and equipment shall be approved by the Engineer. After compaction, the finished surface of the compacted material at the shoulder edge shall not extend above the edge of the shoulder nor be more than 0.4 inches below the shoulder. Tolerance elsewhere shall be 1½ inch, except the surface shall be graded to drain at every location. This project encouraged MBE/WBE participation.

New York State DOT, NY

Robert Kitchen
 (518) 457-2124
 Login or create an account To view email

Published 02/05/2020 on Construction Bid Source

DISCLAIMER: Projects posted by Construction Bid Source contain information that is aggregated daily from multiple sources. It is the individual responsibility of our members to contact the owner directly for purposes of bidding on a project and gaining additional project information. Construction Bid Source does not assume any responsibility for omissions or errors.