Browse all Ventura County, CA

The selected contractor shall provide all labor, materials, equipment, and expertise necessary to perform roach control services within the Citys sewer collection system.

COSCA is seeking proposals for the removal of invasive plants on five (5) work sites with six (6) target species consisting of fennel (Foeniculum vulgare), yellow star thistle (Centaurea solstitialis), artichoke thistle (Cynara cardunculus), Russian knapweed (Acroptilon repens), tree spurge (Euphorbia dendroides), and carnation spurge (Euphorbia terracina) . Project sites are distributed throughout COSCA's open space system (Figure 1) and described in detail in the project scope of work. The extent of the treatment area at each location is illustrated in Figures 2 6. Treatment is to occur in the order that tasks are listed in the scope of work.

Items of Work include the Contractor providing and delivering all labor, materials, tools, equipment, machinery, supplies, and safety measures, necessary to complete the replacement of water-based fire protection systems.

Bids will be received for Pavement Resurfacing Oakview & Piru, Specification No. RD27-03, which consists of construction of mobilization, traffic control and construction signing, water pollution control, Roadway Preparation, Surface Preparation & Crack Treatment, Type II Emulsion Aggregate Slurry, and appurtenant work.

Items of Work include the Contractor providing and delivering all labor, materials, tools, equipment, machinery, supplies, and safety measures, necessary to complete the replacement of water-based fire protection systems.

The work consists of furnishing all labor, materials, tools, equipment, and incidentals as required by the plans (Drawing Number 26-06A, Sheets 1-10), Specifications, and Contract Documents. The general items of work include installing the electrical distribution and associated underground/aboveground infrastructure needed to support future Level 2 fleet EV chargers, including required equipment, conduits/cabling, equipment supports, and site appurtenances, all in accordance with City-approved plans. The Project is located at Civic Arts Plaza 2100 E. Thousand Oaks Blvd. Thousand Oaks, CA 91362.

The Project includes, without limitation, furnishing all necessary labor, materials, equipment, and other incidental and appurtenant Work necessary to satisfactorily complete the Project, as more specifically described in the Contract Documents. Work includes but is not limited to repaving a portion of Pleasant Valley Road between the West City Limits and Ventura Rd, Hueneme Beach Parking Lots A, B and E. The full scope of work is more specifically described in the Contract Documents. This Work will be performed in strict conformance with the Contract Documents, permits from regulatory agencies with jurisdiction, and applicable regulations. The quantity of Work to be performed and materials to be furnished are approximations only, being given as a basis for the comparison of Bids. Actual quantities of Work to be performed may vary at the discretion of the City Engineer. The approximate project area is 273,000 square feet.

As described in the Bidding Documents, the bids are for a public works project FY 2026- 27 Annual Major Streets Rehabilitation Program: Alamo Street (Erringer Road to Gage Avenue), CP60000018 (Project) which include, but are not limited to: 1) construction surveying; 2) 20 L.F. of root pruning; 3) 20 L.F. of root barrier placement; 4) one (1) tree removal; 5) 153,977 S.F. of 2 1/2" full width coldmilling; 6) 620 S.F. of PCC sidewalk replacement; 7) six (6) L.F. of curb and gutter replacement; 8) six (6) curb ramp reconstructions; 9) 72 L.F. of PCC sidewalk grinding; 10) 2,500 tons of asphalt rubberized hot mix placement; 11) three (3) storm drain manhole adjustments; 12) five (5) sewer manhole frame, ring, and cover removal and replacements; 13) seven (7) water valve frame, ring and cover removal and replacements; 14) traffic signing and pavement delineation; 15) stormwater pollution control; and 16) all appurtenant work.

As described in the Bidding Documents, the bids are for a public works project FY 2025- 26 Annual Crack Seal Program, CP60000046 (Project) which include, but are not limited to: Traffic Control, Stormwater Pollution Control, and approximately 198,000 square yards of crack seal on 1) Alamo Street between Gage Avenue and Sycamore Drive; 2) Erringer Road between Alamo Street and Lost Canyons Drive; 3) Lost Canyons Drive between Erringer Road and 3301 Lost Canyons Drive; 4) Royal Avenue between Erringer Road and Corto Street; 5) Sequoia Avenue between Township Avenue and Cochran Street; and 6) all appurtenant work. The expected completion time of the Project is 20 Consecutive Working Days when the City issues a Notice to Proceed.

The City is seeking a contractor to perform services for the upgrade of mechanical systems at the Hill Canyon Treatment Plant and Los Robles Greens Golf Course. At the Hill Canyon Treatment Plant, work shall include replacement of all controls and control system components with new at various buildings. New controls to be installed at select buildings. Replacement of exhaust fans, with associated structural and roofing work, and replacement of VFDs. At the Los Robles Greens Golf Course, work shall include replacement of the existing chiller and pump with new equipment, and the replacement of the existing gas-fired boiler and HHW pump with new equipment. In addition, a new air-cooled split system VRF to provide supplemental cooling to the kitchen and dishwasher room. All existing HVAC system controls to be replaced with new. Gardens buildings to have all new controls added.

The City of Oxnard, Public Works Wastewater Division is seeking bidders for Storm Channel Cleaning Services. The intent is to ensure that storm channels are kept clean of waste and debris to allow for an uninterrupted and unimpeded flow of stormwater to the ocean.

The work to be done consists of but not limited to furnishing all materials, equipment, tools, labor, and incidentals as required in the Specifications and Contract documents for said project to install CPS and ARS units. The work will take place across the entire City of Fillmore, California, and other related work as described in the Specifications and Contract Documents, by reference, made a part hereof.

Notice is hereby given that sealed proposals will be received for performing all work necessary and incidental to: Road grading maintenance on City-maintained direct access roads at six (6)locations in the Arroyo Conejo open space in compliance with applicable federal and state permits and environmental regulations.

The Ventura County Transportation Commission (VCTC) hereby invites sealed bids from qualified contractors to furnish all labor, materials, equipment, and incidentals required to complete the Camarillo Station ADA Improvement Project in accordance with the specifications, plans, and contract documents prepared by VCTC. The scope of work generally consists of improvements necessary to enhance accessibility at the Camarillo Metrolink Station, including but not limited to; installation of accessible paths of travel, curb ramps, tactile warning strips, modifications to platforms, and other related site improvements.

The Scope of Work consists of resurfacing existing asphalt concrete pavement within the Cal-Gisler neighborhood, including the milling of existing asphalt concrete pavement; placement and compaction of asphalt rubber hot mix (ARHM); placement and compaction of asphalt rubber aggregate membrane (ARAM) layer for cape seal pavement treatment; placement of slurry seal; excavation and reconstruction of asphalt pavement failed areas; reconstruction of existing ADA curb ramps; concrete repairs; adjust utility covers to finished grade; removal and replacement of street name signs and posts; and traffic striping.

The work consists of furnishing all labor, materials, tools, equipment, and incidentals as required by the plans (Drawing Number 26-12A; Sheets 1-4) Specifications, and Contract Documents. The general items of work include removal of an existing non-functional Westech clarifier drive unit (mechanical and electrical disconnections), installation of a City provided replacement Westech Model 8050 drive unit, reinstallation of the aerial walkway, replacement drive electrical connections, startup and testing. The Project is located at the Hill Canyon Treatment Plant, 9600 Santa Rosa Road, Camarillo, CA 93012.

The work consists of furnishing all labor, materials, tools, equipment, and incidentals as required by the plans (Drawing Number 26-08A, Sheet 4), Specifications, and Contract Documents. The general items of work include repair of an existing clarifier scum beach unit, replacement of a clarifier scum beach unit, replacement of a failed cleanout pipe and riser, minor excavation and minor asphalt concrete repair. The Project is located at the Hill Canyon Treatment Plant, 9600 Santa Rosa Road, Camarillo, CA 93012.

The project involves the preparation of a site for an interim fire station located at 2269 Alessandro Drive, covering an area of 1.9 acres. The site preparation includes soil remediation, rough grading, and concrete foundation and pavement installation. Additionally, plumbing, mechanical, and electrical work will be required to support the prefabricated modular buildings, which consist of an office, an apparatus bay, and a gym. The excavation will cover a footprint of 0.67 acres to a depth of 7 feet to lower the shallow groundwater level. After dewatering the site, a 10-foot layer of compacted soil will be used to refill the excavated area according to the rough grading. The contractor will install on-site utility services and route the electricity to a city-purchased generator. To manage on-site runoff, a bio-swale will be constructed to the south of the station, directing water into the existing 12-inch storm culvert. The existing entrance driveway will be replaced with new concrete pavement. An underground sewer clarifier will also be installed on the new pavement to handle wash water from the fire trucks.

The City of Camarillo invites qualified firms to submit proposals to provide professional services, including final design and engineering, to the City for new transit charging station infrastructure and remodeled parking lot design at the Camarillo Train Station, as defined in this Request for Proposals.

Items of Work include the Contractor providing and delivering all labor, materials, tools, equipment, machinery, supplies, and safety measures, necessary to complete the replacement of water-based fire protection systems.