Park Improvement Project – Cooper Park, Miami, FL

The scope of work includes, but is not limited to, the following major components in accordance with Exhibit A Electrical Plans and Exhibit B Landscape Plans: 2.2.1 Demolition a) Removal and lawful disposal of existing site elements indicated in the plans. b) Clearing, grubbing as required. c) Protection of existing elements to remain. 2.2.2 Site Work a) Grading, excavation, and backfilling. b) Preparation of subgrade for hardscape, landscaping, and amenities. c) Installation of required base materials. 2.2.3 Fence and Gates a) Supply and installation of new perimeter fencing and gates as specified. b) Anchoring, alignment, and hardware installation as per plans. 2.2.4 Furniture and Amenities a) Furnish and installation of site furniture including benches, trash receptacles, bike racks, signage, and other amenities detailed in the plans. b) Secure anchoring and leveling. 2.2.5 Playground Equipment a) Furnish and installation of playground structures and components as specified by manufacturer and design documents. b) Installation of safety surfacing. c) Compliance with current playground safety standards (ASTM, CPSC). 2.2.6 Hardscape a) Concrete sidewalks, pads, curbing, and any decorative paving. b) Foundations and slabs for amenities, poles, drinking fountains, or equipment. IFB 2026-018 Page 14 of 42 Park Improvement Project Cooper Park 2.2.7 Landscape a) Installation of all trees, shrubs, groundcover, sod, butterfly garden plantings. b) Planting per Coral Gables and Florida-Friendly Landscaping standards. 2.2.8 Irrigation System a) Installation of complete irrigation system including piping, valves, controllers, sensors, and connections. b) Testing and commissioning for full operational functionality. 2.2.9 Water Connection & Drinking Fountains a) Relocation of water meter b) Installation of potable water service lines and fittings. c) Connection to public water as indicated. d) Furnish and install drinking fountains, including pads, plumbing, and ADA-compliant features. 2.2.10 Poles and Light Fixtures a) Installation of light poles, fixtures, foundations, conduits, and wiring per electrical plans. b) Testing and verification of illumination functionality. 2.2.11 Boulders & Natural Features a) Placement of boulders and natural features at designated locations. b) Stabilization and safety checks. 2.2.12 Butterfly Gardens a) Preparation and installation of designated butterfly garden areas. b) Use of approved plant species, soils, and pollinator-supportive features. 2.2.13 Electrical Work a) All routing, wiring, conduits, panels, grounding, and terminations required to support lighting, fountain systems, and any electrical loads shown on plans. b) Coordination with City inspectors and power utility. 2.2.14 Flag Pole Installation a) Supply and installation of flagpoles, footing, internal halyard components, lighting and accessories. b) Ensure plumbing alignment and wind-load compliance. 2.3 PROJECT COMPLETION The Project shall be deemed completed upon the successful completion of the above tasks as determination by the City when each item is delivered to the satisfaction of the project specifications.