Browse all Nevada

Description: Perform crack sealing, pavement patching, seal coating, or fog sealing in the specified areas in accordance with the plans and specifications. Restripe the parking lot and repaint curbs and bollards to match existing conditions.

Description: The Project entails the construct art installation pad, along with the installation of site lighting and landscape work according to the drawings and specifications.

Scope of Work: This work will primarily take place within the UMC 7 Story Tower on the sixth (6) floor, located at 1800 W Charleston Blvd, Las Vegas, NV 89102. As a part of the work, approximately 3,400 square feet will be refreshed to create a new office space. The new work will consist of refreshing finishes for the entire space. The renovation work will include demolition of flooring, finish work, and upgrades to the existing light fixtures. New electrical and data outlets will be installed to accommodate workstations.

Scope: The work includes the removal and replacement of the existing HVAC equipment, supporting systems integration, and any additional site restoration resulting from systems improvements. The site is located at Sunset Maintenance Facility (SMF), 5165 W. Sunset Rd, Las Vegas, 89118.

Description: This Project involves expanding the existing evidence impound lot at the Department of Public Safety Training Division. Improvements include installation of site lighting, security cameras, an automatic vehicle gate, and a new carport/work shed structure.

The primary objectives of this request for proposal (RFP) shall be to provide data necessary for the evaluation of competitive proposals that will result in shortlisting of proposers for interviews, by which at the conclusion of the interview process the City may enter into an preconstruction services agreement with the most qualified proposer in accordance with the Proposal and Interview Evaluation Process described in the Special Conditions. The City of Sparks desires an experienced, qualified Construction Manager at Risk (CMAR) to provide preconstruction services, including, but not limited to, pricing, constructability reviews, and innovation/risk services in collaboration with the Citys architectural team to finalize the design and ultimately construct a new Sparks City Hall.

Description: This Project includes trenching, saw-cutting, backfilling, and landscape repair to install new conduit for site pole lighting. It also covers installing wiring for pole lighting and receptacles, as well as modifying the existing Lutron lighting control system to support the new fixtures. Controls will include manual on/off and dimming (raise/lower) overrides located in Building #1.

Description: Remove and Replace interior flooring and finishes and provide temporary kitchen and office facilities per drawings and specifications.

The Tonopah Airport is an airport with two runways, runway 11-29 and runway 15-33. It also contains taxiways A and B. This project consists of work on the apron. The scope of work includes the full depth pavement removal, repaving, and remarking of the apron.

Scope of Work::This work will primarily take place on floors two (2)and six (6) within UMC's Summit Tower, located at 2040 W Charleston Blvd, Las Vegas, NV 89102. As part of the work, approximately 2,574 square feet on the second floor will be built out to a vanilla shell, and 9,260 square feet on the sixth floor will be demoed and built out. The renovation work will include demolition, asbestos abatement, new plumbing lines, HVAC, electrical, finishes, millwork, and communications.

Description: Perform Pavement Maintenance, Resurface and Rehabilitation, all per plans.

Description: Remove and replace the existing air-cooled chiller with two new screw-type chillers. Modify both underground and above ground chilled water piping as needed to serve the new equipment, and update the existing chiller enclosure to accommodate the new units. Remove the existing primary chilled water pumps and install three new primary pumps. Install three new mini-split systems in the main DMV building, including associated outdoor condensing units mounted on the roof.

Description: Replace 200kW Generator, and modify supporting systems per plans and specifications.

Scope of Work: Contractor to provide monthly preventative maintenance and repair service, and when conditions warrant, adjust, repair, or replace all parts and components, on elevators and escalators at Reno-Tahoe International Airport (RNO) and elevators at Reno-Stead Airport (RTS).

Description: The Work consists of installing new fire sprinkler systems and performing hazardous materials storage upgrades at the Administration and Pool Buildings per the plans and specifications.

Total Small Business Set-Aside, 238210 - Electrical Contractors and Other Wiring Installation Contractors. To provide Electrical Services at Brookhaven National Laboratory (BNL). The Contractor shall provide all labor, services, materials, tools and equipment to perform a variety of assigned electrical work as required on various projects throughout the BNL site. Base year September 2026 September 2027, plus 4 option years.

Description: Buildings Rehabilitation/Renovation - Remodel two (2) restrooms for ADA compliance per drawings and specifications.