SMALL WORKS Wood/Metal Shop Rollup Doors Replacement , Pateros, WA

1. Remove and legally dispose of existing overhead doors and associated components, including tracks, springs, and hardware. 2. Provide and install new commercial-grade insulated steel sectional overhead doors at the Metal Shop and Wood Shop locations. 3. Doors shall be minimum 2 thick with track and hardware suitable for the opening size and application. 4. New doors shall comply with Washington State Energy Code 2024 (WSEC24) and have a maximum U-factor of 0.24. The existing buildings are conditioned; therefore, door assemblies are required to meet current energy code requirements. 5. Door Operators a. Provide and install commercial-duty wall-mounted jackshaft door operators suitable for the door size, weight, and intended use. Operators shall be manufactured by one of the following: LiftMaster (MAXUM series or equivalent commercial line) Genie (commercial jackshaft series) Manaras (jackshaft series) b. Operators shall meet the following minimum performance requirements: Wall-mounted jackshaft configuration Operator shall be sized by the manufacturer for the specific door weight, size, and duty cycle, with a minimum 3/4 HP motor UL 325 compliant, including monitored entrapment protection devices Adjustable limits, full safety/reversing features, and standard commercial controls (push-button station and required safety devices) Complete with all components, accessories, and appurtenances required for a fully functional system c. The Bidder shall identify the proposed manufacturer and model proposed. d. Equipment not meeting these requirements or not manufactured by one of the listed manufacturers may be rejected by the Owner. 6. Coordinate installation with existing finish openings: a. Metal Shop Door: 11' 11" W x 11' 1/2" H b. Wood Shop Door: 9' 9 3/4" W x 7' 11" H c. Contractor shall verify measurements before ordering materials. 7. New doors to be factory white finish. 8. Electrical power to the door operator location will be provided by others. Final electrical connections, controls, and low-voltage wiring associated with the door operator shall be by the Overhead Door Contractor. 9. Contractor shall maintain building security and weather protection at all times. Doors shall not be removed unless replacement occurs the same day or temporary protection acceptable to the Owner is provided.