Browse all Florida

The County of Volusia is soliciting qualified Contractors to provide county-wide pressure washing and soft-wash services for buildings, structures, and related exterior surfaces across all County divisions and facilities.

The Scope of Work requires the contractor to provide fully turnkey temporary housing and an apparatus bay to support uninterrupted operations at Fire Station #51 during an active renovation. The contractor is responsible for all materials, labor, engineering as required, permitting, delivery, installation, setup, anchoring, utility readiness, maintenance (if applicable), and final removal of the temporary facilities. The District will provide utility connections and limited site preparation, while all other elements necessary for a complete and operational installation are included in the contractors responsibilities.

The temporary housing must accommodate eight firefighters and include bunk rooms, restroom facilities, kitchen, dining, and day room areas, designed to meet specified wind-load and safety requirements. The apparatus bay must provide a clear-span structure suitable for fire equipment, including overhead doors, lighting, egress, and all related structural and safety components. All facilities must comply with applicable codes, safety regulations, and the site plans prepared by Clymer Farner Barley, with any discrepancies addressed prior to construction.

Florida Keys Aqueduct Authority is accepting bids for the Decommissioning and removal of Reverse Osmosis Equipment at The Kermit H. Lewin Existing

Milling existing pavement of approximately 17,600 LF of 20 wide roadways, finishing the milled surface, and placement of new asphalt pavement in a single course 1) structural 165 lbs/sy. Project also includes milling and resurfacing approximately 125 SY of SW Dortch St, immediately East of the intersection with SW Cullen Ave. Scope of work includes milling, levelling, reworking and finishing milled surface, limerock placement, mixing in place, finishing mixed base, grading, asphaltic concrete pavement, erosion control, grassing, painted pavement markings, stormwater pipe, and incidental items.

This project is to provide roadway resurfacing improvements and safety improvements to existing and new guardrail locations. This project will consist of base repair, milling and installation of 2 FDOT SP 12.5 76-22 overlay. Temporary striping after each day of production and thermoplastic striping 14 days after completion of the paving operation. Right of Way restoration with appropriate fill material, grading to allow water to sheet flow off asphalt, sodding, and all other incidental work associated with roadway resurfacing will be included. There is also a proposed upgrade to current guardrail with additional new installations. Fifty percent (50%) of milling will be retained by the Escambia County Road Department. This work shall be coordinated by the contractor, and Escambia County Road Department will provide the required trucks to obtain the milling.

3.1. SPECIFICATIONS/SCOPE OF WORK The Successful Bidder shall provide all materials, tools, labor, and equipment, for painting services, Citywide, on an as needed basis. The main objectives of this contract are as follows: 1. Repair cracks, chips, and surface damage on stucco and concrete surfaces; 2. Restore the structural integrity and weather resistance of the surfaces; and 3. Enhance the visual appearance of the surface through proper repair and finishing techniques. The Successful Bidder shall: 1. Provide protection of work site, inclusive of surrounding surfaces against damage (i.e., barricades, caution tape, windscreens, etc.); 2. Maintain a safe work environment utilizing industry standard tools such as ladders, scaffolding, swing stage, lifts, etc.; 3. Respond to requests for site visits within two (2) business days; 4. Construct and remove any temporary access to work site, if necessary; 5. Conduct a thorough inspection ofsurfacesincluding stucco and concrete surfacesto assessthe extent of any damage; 6. Identify areas requiring repair, including cracks, spalls, delamination, and surface imperfections; 7. Prepare and/or remove wall vinyl/wallpaper as needed; 8. Prepare the surfaces by cleaning, removing debris, and repairing any underlying issues such as water infiltration or structure damage; 9. Pressure wash all surfaces, including roof, walls, doors, gates floor, gutter systems, and/or windows; 10. Be responsible for any and all permits (when applicable); 11. Refurbish/repair/install drywall, plaster and other masonry surfaces and structures; 12. Clean surfaces to remove dirt, grease, and rust using wire brushing, sanding chemical cleaning, pressure cleaning and sandblasting; 13. Apply rust inhibiting primer to create protective barrier and apply suitable paint; 14. Patch and repair any cracks and spalling; 15. Clean and remove any stains, dirt, or debris from stucco and concrete surfaces to restore appearance; 16. Apply a protective sealant to stucco and concrete to enhance durability and resistance to weathering and staining; 17. Refill/caulk windows, doors for water prevention; 18. Inspect and repair any damaged or deteriorated expansion joints in the stucco and concrete surfaces to prevent water infiltration and maintain structural integrity; 19. Apply a coat of paint to surfaces (including walls, doors, rolling metal doors, window frame treatment). Color shall match existing color, finish and texture. Paint shall be purchased from Lanco (NO SUBSTITUTION); 20. Paint surfaces utilizing standard tools such as paint brushes, rollers, hawk, spray machines, etc.; 21. Apply waterproofing treatment/sealant to painted surfacesto prevent damage and water penetration. Some facilities would need excavation around the surfaces and footings to address capillary action issues; 22. Maintain moldings, textures and patters on surfaces for visual appeal; 23. Sandblast electric static paint, removal of old paint, epoxy and rust-oleum application and paint baking; 24. Remove all excess paint on surfaces; 25. Dispose of all debris off site on a daily basis; and 26. Leave site in ready for use conditions.

The City of Ocala seeks a qualified vendor to provide all labor, equipment, and supervision necessary to perform professional palm inoculation services and Cambistat treatments for selected trees, reinforcing the Recreation & Parks Departments efforts to protect tree health, extend canopy lifespan, and preserve the quality and appearance of public spaces for residents and visitors. The City of Ocala manages a diverse urban forest across parks, public landscapes, Downtown, the North Magnolia corridor, and the Ocala Golf Club, including highvalue palms vulnerable to Lethal Bronzing Disease, a rapidly spreading and fatal infection best managed through early detection and proactive antibiotic inoculation. In addition, the City maintains a wide range of mature shade trees that require ongoing care to ensure safety, stability, and longterm vitality, with growthregulation treatments like Cambistat helping reduce canopy stress and improve resilience in hightraffic urban environments.

The City of Sarasota is seeking solid waste hauling and transporting services with a vendor to transport all the Municipal Solid Waste (MSW) received at the City of Sarasotas transfer station. Also, requesting optional hauling and transporting services for yard waste debris to Sarasota County Landfill or other yard waste disposal facility.

The City of St. Petersburg Parks and Recreation Department is soliciting bids from qualified and licensed contractors to furnish all labor, materials, equipment, supervision, and related services necessary to resurface municipal swimming pools utilizing a marcite finish system. The work is intended to restore and protect the pool surfaces, improve water retention performance, enhance durability, and improve the overall appearance and safe operation of the facilities.

This project will include resurfacing services at the following locations: Lake Vista Pool - 1450 60th Ave S, St. Petersburg, FL 33705; Fossil Park Pool - 6739 Dr M.L.K. Jr S. N, St. Petersburg, FL 33701; and North Shore Activity Pool - 901 N Shore Dr NE, St. Petersburg, FL 33701.

The Doors and Windows Replacement at various Fire Stations (Projects) involves the City of Miami (City) Fire Rescue (Fire) Stations Numbers 2, 9, and 12. The Work consists of furnishing all materials, tools, labor, staging, signage, traffic control, any and all necessary tests, shop drawing, permits, plans, and equipment to remove existing doors and windows, then properly dispose, furnish, and install new hurricane wind impact doors and windows. At Fire Station No. 2, remove and properly dispose of four (4) existing Trane HVAC units and replace them with new units. At Fire Station No. 9, remove and properly dispose of two (2) existing HVAC roof units and replace them with new units. For funding purposes, the Projects shall be bid separately as follows: Project 40-B213210 shall consist of the work on the Fire Station Number two (2), Project 40-B213209, shall include of work on the Fire Station Number nine (9), and Project 40-B223212 shall involve the work the Fire Station Number twelve (12).

The City is requesting proposals on behalf of the Public Works Department to obtain the services of a qualified firm or firms to provide debris site monitoring services in accordance with applicable regulations of the Federal Emergency Management Agency (FEMA), Federal Highway Administration (FHWA), Florida Department of Transportation (FDOT), Florida Department of Health (FDH), Natural Resources Conservation Services (NRCS), South Florida Water Management District (SFWMD), and the Florida Department of Environmental Protection (FDEP) in conjunction with the Citys needs.

The City of Plant City is seeking bids from qualified and experienced vendors to provide services related to the design, fabrication, delivery, and installation of custom columbaria systems and associated memorial components for three (3) City of Plant City cemetery facilities, in Plant City Florida. Vendors must be experienced in memorial construction, columbaria manufacturing, cemetery infrastructure, and project coordination capable of delivering durable, aesthetically appropriate, and long-lasting memorial structures suitable for Florida outdoor conditions.

Columbia County Board of County Commissioners is seeking proposals for a comprehensive removal, installation, and site-improvement within the Courthouse grounds and surrounding parking-lot areas. This work will include demolition of existing plants, stump removal, mulch strip-out, restoration of beds, and installation of new specified plants. A complete irrigation system inspection and repair is required prior to placement of any new landscaping elements.

The bids will be for furnishing all materials, labor, supervision, equipment, supplies, fees, expertise, and services necessary to The bids will be for furnishing all materials, labor, supervision, equipment, supplies, fees, expertise, and services necessary for the replacement of 22,000 linear feet of water mains within the Golfview Heights residential community and along Ohio Street located in West Palm Beach. The construction services consist generally of but are not limited to, installation of potable water mains, installation of 2 sanitary sewer manholes, installation of 824 linear feet of gravity main, installation of 27 sanitary sewer laterals, fire protection improvement, and replacement of water service lines with associated appurtenances and site restoration of affected areas within Golfview Heights and along Ohio Street. Certain documents necessary for submittal of a bid may be exempt from public disclosure. Bidders shall download and submit a Plan Holder Registration form (attached) to access these exempt documents. For questions, please contact the Project Manager Jacob Lee at (561)493-6024 or [email protected]

The objective for this project is for a qualified construction firm(s) with the experience to rehabilitate an existing lift station for the Toho Water Authority.

Orange County, Florida, henceforth referred to as the County is accepting sealed offers for Commercial Doors and Gates Preventative Maintenance and Repairs for Facilities Management.

Port St. Lucie is being issued to establish a contract with a qualified proposer who will provide Preventive Maintenance of Bridges & Water Control Structures to the City of Port St. Lucie.

The Town of Sewalls Point is seeking bids from licensed Contractors to establish a pool of pre-qualified contractors and unit prices for the installation of gravity sanitary laterals from existing Town residents to the Martin County Owned Sewer Laterals located in the adjacent Town rights-of-ways.

The project includes roadway paving improvements for 18th Street and adjacent roadway segments within the City of Lynn Haven. The work generally includes asphalt paving, paved turnouts, pavement markings, signage, sodding/restoration, maintenance of traffic, erosion control, testing, and all incidental work necessary for a complete project. The project includes a Base Bid and Additive Alternates as shown in the plans.

3.2. SCOPE OF SERVICES The scope of services is a general guide to the work the City expects to be performed by the Consultant and is not a complete listing of all services that may be required or desired. The City desires to improve roadway conditions to improve capacity and allow citizens to safely walk/bike to schools and bus stops. The improvements sought include, but are not limited to bike lanes, pedestrian traffic signals, sidewalk repairs, and sidewalk harmonization. Proposers and subconsultants must be FDOT Certified in the following work groups and capable of providing quality delivery of these services: o Work Group 10: Construction Engineering Inspection: 10.1 Roadway Construction Engineering Inspection The City intends to contract with a qualified firm for CEI services which include, but are not limited to: A. General - It shall be the responsibility of the Consultant to administer, monitor, and inspect the Construction Contract such that the Project is constructed in reasonable conformity with the plans, specifications, and special provisions as prepared by the Engineer of Record. 1. The Consultant shall observe the Contractors progress and quality of work and identify discrepancies, report significant discrepancies to the City, and notify the Contractor of such observed discrepancies and document the outcome of the discrepancy. 2. The Consultant shall advise the City Project Manager of any significant omis-sions, substitutions, defects, and deficiencies noted in the work of the Contractor and any corrective action that has been performed by the Contractor. B. On-site Inspection - The Consultant shall monitor the Contractors on-site construction activities and inspect materials entering into the work in accordance with the plans, specifications, and special provisions for the Construction Contract to determine that the Project is constructed in reasonable conformity with such documents. 1. The Consultant shall monitor all off-site activities and fabrication. 2. The Consultant shall keep detailed accurate records of the Contractors daily operations and of significant events that affect the work. 3. Consultant shall be responsible for monitoring and inspection of the Contractors Work Zone traffic control plan and review of any modifications to the Work Zone Traffic Control Plan, including alternate Work Zone Traffic Control Plan, in accordance with the latest FDOTs procedures. Consultant employees performing such services shall be qualified in accordance with the FDOTs procedure. C. Materials Sampling and Testing Duties The Consultant shall perform sampling and testing of component materials and completed work in accordance with the Construction Contract documents. 1. The minimum sampling frequencies set out in the FDOTs Materials Sampling, Testing and Reporting Guide shall be met. In complying with the aforementioned guide, the Consultant shall provide daily surveillance of the Contractors Quality Control activities at the project site and perform the sampling and testing of materials and completed work items that are normally done in the vicinity of the Project for verification and acceptance. 2. The Consultant shall be specifically responsible for verification sampling and testing to determine the acceptability of all materials and completed work items on the basis of either test results or verification of a certification, certified mill analysis etc. 3. The City will monitor the effectiveness of the Consultants testing procedures through surveillance and obtaining and possibly testing independent assurance samples. 4. Sampling, testing and laboratory methods shall be as required by the FDOTs Standard Specifications, Supplemental Specifications or as modified by the special provisions of the Construction Contract. 5. Documentation reports on sampling and testing shall be submitted to responsible parties within a